31
Setting Up Your Projector
2-3. Selecting the Power Cable (English)
The power cable is not included with the projector. Refer to “2-3-1. AC Power Work Specifications” (page 32) and provide the
necessary power cable.
WARNING:
Carefully read the contents described in this section before connection and connect the cables according to the proper
procedure. Inappropriate handling may cause fatal, serious or other bodily injuries due to fire or electric shock.
CAUTION:
• For details on connecting the power cable, refer to the projector User’s Manual.
• Before connecting the power cables, check that the main power switch of the projector is turned off. Implement the con-
nection with AC power shut off.
• Be sure to ground the equipment to ensure safety. Use a power cable that meets the standards and power supply voltage
of the country where you are using the projector (page 33), and always connect the equipment to the ground. If the ground
is not connected, it may cause electrical shocks.
• When connecting the power cable plugs to the AC IN and the electrical outlet, securely insert the plugs all the way in. If
the connection between the power cable plug and the electrical outlet is loose, the plug area may generate heat, causing
burns and accidents.
• Switch the power cable and power supply voltage of the projector to match the projector to the voltage of the electrical
outlet you are connecting to. If selected incorrectly, it may cause damage or fires.
To Next Page
Loading...
Need help?
General
