68
LCD Menu
4-3-4. Setup
This menu is for service personnel. For the procedure to use it, refer to “4-1-1. When You Use the Service Personnel Menu”
(page 63).
Douser Setup
Sets the douser open/close state. Request your dealer/distributor to perform the setting.
← Selects the item.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Open(Power On) When set to Enable, the douser opens after the projector starts up.
Lamp On When set to Enable, the douser opens when the lamp is turned on.
Title Select When set to Enable, the douser opens when a title is selected.
Panel Key Lock
The control buttons on your projector are locked to be inoperative.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Lock Enable a lock on the control buttons on your projector.
Unlock Disable the lock on the control buttons.
NOTE
When the buttons on the projector’s control panel are locked, press the EXIT button on the projector for about 10
sec. to unlock them (The key lock setting on the projector becomes Unlock).