56
Projector Adjustment and Connecting
3-7. Replacing the Notch Filter
This projector is equipped with a notch filter that has been optimized for projection in a movie theater. The image can be made
brighter by removing the notch filter. Note that the projector does not comply with the Color Gamut in the DCI standards in that
case.
NOTE
If you remove the notch filter, always attach the dummy bracket.
Preparation:
• Phillips head screwdriver (No.2).
• Turn off the projector and disconnect it from the electrical outlet.
Remove the notch lter cover.
1. Loosen the screw. The screw cannot be removed.
2. Open the notch lter cover, and then pull it up and remove it.
To Next Page
Loading...
Need help?
General
