NEC NC900C - Lens Control and Reset Functions

45
Setting Up Your Projector
7
Press the LEFT/RIGHT button to display “Slot A” and press the DOWN button.
8
Press the LEFT/RIGHT button to display “IMB”.
9
Press the ENTER button.
(*) is displayed to the selected item.
10
Press the EXIT button several times.
The projector exits the menu and goes back to the regular screen.
If you press the EXIT button and then select “Yes” and press the ENTER button on a regular screen, you will returned
to user mode.
This completes the setting of the projector.
TIP
Settings of slot A and slot B can be confirmed at projector’s [Information] - [Option Status]