NEC NC900C - Page 88

88
Appendix
Preparation:
• Phillips-head screwdriver (No. 2)
• Remove any cables connecting to external video equipment.
• Remove the side cover (see page 26)
1
Remove the option board mounted in slot A and the slot B blocking panel.
Remove the board and blocking panel in the order slot A then slot B.
1. Unscrew the knurled screws (2 locations) on the front of the slot A/B until the screws turn
freely ( ). These screws cannot be removed.
2. Pull the board or blocking panel directly out ( ).
Slot B
Blocking panel
Slot A