NEC NEAX 2000 IPS - Page 108

CHAPTER 1 MAINTENANCE SERVICE FEATURES
– 98 – NWA-008847-001 Rev.3.0
a6ch1001.fm
DESCRIPTION DATA
Provide the call log collection with the IP-CS.
NOTE: When changing this data for IP-CS
accommodated in a remote site, exe-
cute the office data copy by CMEC
Y=8 to the remote site.
•
(1)
(2)
Y=40
000-255: IP-CS No.
0: To provide
1: Not provided
Provide the fault log collection with the IP-CS. •
(1)
(2)
Y=41
000-255: IP-CS No.
0: Not provided
1: To provide
Specify the output destination for the fault
logs/call logs.
NOTE: Set the output port for fault logs/call
logs by CM40 Y=00.
•
(1)
(2)
Y=6
00: Output destination of logs
2 : RS port of MP
3: Not output
Specify the collection method of fault logs/call
logs.
•
(1)
(2)
Y=6
02: Collection method of logs
0 : Not overwritten
1 : Overwrite
Specify whether fault logs are collected when
the D
term
IPs/IP-CSs login to the system or the
IP-PAD is in online status.
NOTE: When setting the second data to 1,
fault kind 49 (IP component reset
occurrence) is not registered.
•
(1)
(2)
Y=6
10: Fault log collection
0 : To collect
1 : Not collected
Specify the RS port to collect VoIP log. •
(1)
(2)
Y=00
0: RS0 port
1: RS1 port
08 : VoIP log collection
NONE : No data
Specify the data length for the RS port.
NOTE: When using MP RS-232C port for
MAT, set the initial data.
•
(1)
(2)
Y=01
0: RS0 port
1: RS1 port
0: 7 bit
1: 8 bit
A
CMAD
CMEA
CM40
B
OCTOBER/14/2005
VoIP LOG COLLECTION