5-64 Installing Options
Locating device bays — minitower
A
– 3 1/2-Inch Internal Bays
C
– 5 1/4-Inch Accessible Bays
B
– 3 1/2-Inch Accessible Bay
Preparing the Device
Before installing a storage device in the system, follow any
preinstallation instructions that come with the device. For
example, check the following information:
Diskette drive — remove any termination on an optional
diskette drive. See the documentation that comes with the
drive.
IDE drive — check the jumper settings on the device
before installing it. See the documentation that comes with
the device for jumper setting information.
CD-ROM drive or DVD-ROM drive — set correctly as
the first (master) or second (slave) device on the secondary
IDE channel.
See “Connecting Device Cables” for more information.
To Next Page
Loading...
