4-10 Managing System Resources
Using the Chassis Intrusion Notification Feature
LANDesk Client Manager allows you to monitor your system
against chassis intrusion. Whenever the chassis is opened,
LANDesk Client Manager logs the intrusion and reports the
incident in a screen message the next time the system is
booted. The message appears in a LANDesk Client Manager
Notification window. This window appears every time the
system is rebooted until the report is cleared.
Close the notification window to remove the message from
the screen. Clear the message to prevent it from appearing
again the next time the system is rebooted.
To clear the message, follow these steps.
1. Access LANDesk Client Manager.
If the LANDesk Client Manager Notification window
is still open, click
Yes
, and then click the Client
Manager button.
From the desktop, click
Start
on the taskbar, point to
Programs
, point to
LANDesk Client Manager
, and
click
LANDesk Client Manager 3.32
.
LANDesk Client Manager launches.
2. Open the Tools menu and click
PC Health
. The PC
Health window appears. The Chassis Opened field
displays the Yes setting.
3. Click
Clear
next to the Chassis Opened field.
4. Exit from LANDesk Client Manager.
To Next Page
Loading...
