3-12 Configuring the System
Power Management Setup
Choose the Power Management Setup menu by selecting it
from the Main menu and pressing
Enter
.
!
CAUTION
Setting items on this menu to incorrect values
can cause your system to malfunction.
The following features are available from the Power
Management Setup menu.
Power Management
PM Control by APM
Video Off method (suspend, standby, doze, NA)
Video Off After
MODEM Use IRQ
Reserve IRQ 9
Doze Mode
Standby Mode
Suspend Mode (disabled by default if Power Management
is disabled)
HDD Power Down (disabled by default if Power
Management is disabled)
HDD Down When Suspend
Soft-Off by PWR-BTTN (instant-off/delay 4 seconds)
CPUFAN Off In Suspend
PWRFAN Off In Suspend
To Next Page
Loading...
