NEC POWERMATE ES 5250 - Replacing the Front Panel - Small Desktop

Installing Options 5-79
Replacing the Front Panel — Small Desktop
Replace the small desktop front panel as follows.
1. Align the front panel posts with the holes in the front of
the system unit (see the following figure). Align the front
USB port with the cutout on the front panel.
2. Press along the top edge of the front panel and then along
the bottom and side edges until the front panel snaps into
place.
3. Replace the system unit cover (see “Replacing the Small
Desktop or Desktop Cover”).
Aligning the front panel — small desktop