EasyManua.ls Logo

NEC POWERMATE ES 5250 - Page 194

NEC POWERMATE ES 5250
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-78 Installing Options
2. Locate the three locking tabs inside the front panel (near
the upper edge). Squeeze the right two tabs together to
release them from the slots in the chassis. Then press the
left-most locking tab out of its slot.
Note:
The three tabs along the top of the
front panel are locking tabs that must be
released before the panel can be removed (see
the following figure).
Locating the front panel tabs, posts, and slots small desktop
A
Locking Tabs
C
Slots
B
Posts
3. Once the locking tabs are free, tilt the front panel down to
free its lower edge from the tabs on the bottom of the
chassis.
4. Install the device (see Installing a 5 1/4-Inch Device
Small Desktop).

Table of Contents

Related product manuals