Configuring the System 3-25
6. Remove the CD from the CD tray.
7. Click
OK
to reboot.
This completes the Auto Rebuild and Restore procedure.
See “NEC Application and Driver CD” for instructions on
installing any of the applications or online documents, or to
install device drivers that did not come with your system.
Restore any application or driver that was not provided by
NEC by using the vendor diskette(s) or CD-ROM(s) included
in its original packaging.
Custom Rebuild and Restore
Follow these steps to format your hard drive with choices on
repartitioning the drive:
!
CAUTION
This OS Restore program deletes all the data on
your hard drive. If possible, back up your data
before performing an OS restore.
1. Launch the NEC OS Restore CD and follow the prompts
to get to the Restore Mode screen (see “Launching the OS
Restore CD”).
2. Click
Custom
to repartition and/or and reformat your
hard drive before reinstalling the operating system.
After you click Custom, the integrity of your system’s
existing FAT table is verified.
To Next Page
Loading...
