NEC POWERMATE ES 5250 - PNP;PCI Configuration Setup

Configuring the System 3-13

Resume by Ring

Resume by Alarm

Date (of Month) Alarm (appears only when Resume by
Alarm is enabled)

Time (hh:mm:ss) Alarm (appears only when Resume by
Alarm is enabled)

Wake Up On LAN

Restore AC/Power Loss

IRQ[3-7,9-15],NMI

Primary IDE 0

Primary IDE1

Secondary IDE 0

Secondary IDE 1

Floppy Disk

Serial Port

Parallel Port
PNP/PCI Configuration Setup
Choose the PNP/PCI Configuration Setup menu by selecting
it from the Main menu and pressing
Enter
.
!
CAUTION
Setting items on this menu to incorrect values
can cause your system to malfunction.
The following features are available from the PNP/PCI
Configuration Setup menu.