Installing Options 5-75
Connecting an internal SCSI device
A
– SCSI Cable
B
– Power Cable
4.
See the documentation that comes with your SCSI device
for configuration information.
PC Card Adapter Cabling
The following procedure describes how to cable a PC card
adapter.
1.
Connect the connectors at one end of the cable set to the
PC adapter board. (The PC adapter board is installed in
one of the expansion slots. See “Installing and Removing
Expansion Boards” if the board must be installed first.)
The connectors are keyed to fit only one way.
2.
Connect the connectors at the other end of the cable set to
the connectors at the rear of the PC card adapter.
To Next Page
Loading...
