3-24 Configuring the System
3. The Partition Information screen that appears in Windows
95 or Windows 98 has three options (Back, FAT 16, and
FAT 32) and lets you select the File Allocation Table
(FAT) type you want to use for the operating system
restore:
Click
Back
to return to the Operating Mode screen.
Click
FAT 16
to select the FAT 16 allocation table
(current FAT type).
Click
FAT 32
to select the FAT 32 allocation table
(available for Windows 95 or Windows 98 systems
only).
Note:
Some older software may not work in
a Windows 95 or Windows 98 system configured
for FAT 32. In addition, select FAT16 if a dual-
boot system (with Windows 95 or Windows 98
and Windows NT 4.0) is desired.
4. A FAT 16 or FAT 32 Partition warning screen appears
indicating that the system is about to partition and format
your hard drive using the FDISK program. This warning
screen contains three options: Back, Exit, and Continue.
5. Click
Continue
. The following steps should take place.
system performs FDISK
system reboots
partitions are formatted
OS and drivers load from the CD
The “Operating System Restore Completed” screen
appears when all files have been restored.
To Next Page
Loading...
