Adding Options 5-61
If you are installing an IDE CD-ROM reader, also
connect the audio cable (see the instructions that
come with the reader).
■ If you are installing a 1.2-MB diskette drive, connect
the diskette drive signal cable and power cable.
NOTE
The installation of a second diskette drive
requires the removal of the standard two-connector
diskette drive cable and the installation of a three-
connector cable. See “Diskette Drive Signal Cable”
in this chapter for cable installation information.
Be sure to align the signal cable connector as shown
in the figure.
Connecting 1.2-MB diskette drive cables
To Next Page
Loading...
