5-62 Adding Options
8. Secure the device in the slot as follows. See the figure
appropriate for your device.
■ Align the holes in the device with the holes in the
device bracket.
■ Secure the device to the bracket with the screws that
come with the drive.
Use three screws (two screws on one side, one screw
on the other side) to secure a 3 1/2-inch drive.
Use four screws (two screws on each side) to secure
a 5 1/4-inch drive.
Securing a 3 1/2-inch device
To Next Page
Loading...
