24
2. Projecting an Image (Basic Operation)
Applicable lens: NP48ZL/NP49ZL
1. Adjust the focus until the image is clear.
Adjusting with buttons on the cabinet
Use the FOCUS (+) or (−) button on the projector
cabinet.
Adjusting with the remote control
① Press the FOCUS button or the
ZOOM button.
The test pattern and the [LENS
CONTROL] screen will be dis-
played on.
LENS CONTROL
[ENTER] CHANGE ADJUSTMENT
ZOOM
FOCUS
② Press the ◀/▶ buttons.
2. Adjust the zoom until the projected image ts the screen.
Adjusting with buttons on the cabinet
Use the ZOOM (+) or (−) button on the projector
cabinet.
Adjusting with the remote control
Press the ▲/▼ buttons.
3. Adjust the focus again with the same procedure as Step 1 to make ne adjustments to the focus.
To Next Page
Loading...
Need help?
General
