Programming
Setting Up the System SMTP Options
1. Enable SMTP Email Delivery System Wide.
Program
Number
Program Name Description
47-18-01 Enable SMTP Enter 1 to enable SMTP email delivery system-wide.
By default, SMTP email delivery is disabled (0).
47-18-08 SMTP Email Address Specify the email account that the SMTP server will use to process
email sent from the SL1100 (e.g., yourname@emailserver.com).
By default, there is no entry for this option.
2. Specify the site's SMTP server name and port.
Program
Number
Program Name Description
90-11-11 DNS Primary Address Enter the IP address of primary Domain Name Server (DNS).
• The DNS (or name server) is the computer connected to the inter-
net that converts a domain name (such as www.yahoo.com) to a
specific IP address for routing on the internet. If you want to use a
domain name to identify your SMTP server in the following option,
you must make an entry for this option. The entry is the IP ad-
dress of your name server.
By default, there is no entry for this option.
90-11-12 DNS Secondary Address Enter the IP address of secondary Domain Name Server (if any).
By default, there is no entry for this option.
47-18-02 SMTP Server Name Enter the name of the SMTP server that will handle email delivery
for the installation site. The SMTP server name is typically similar to
smtp.emailserver.com.
• If you didn't make a name server entry in the previous entry, you
must enter your SMTP server's IP address in this option (not its
name).
By default, there is no entry for this option.
47-18-03 SMTP Port Number Enter the port (logical connection) the installation site's email server
uses for SMTP. Refer to Table 2-3 Common Email Notification
SMTP Server Settings on page 2-85 for setting examples.
By default, SMTP uses port 25.
ISSUE 3.5 SL1100
InMail Feature Manual 2-87
E
To Next Page
Loading...
