Hotel Integration
Description
Hotel integration allows the SL1100 InMail to be used in a hotel environment. In addition to other
InMail features it provides basic integration when used in conjunction with dial access codes from the
front desk extension.
The table below shows the supported hotel messages and what if any action is taken for a subscriber
mailbox. For more information on the Hotel Motel feature refer to the Features and Specifications
Manual.
Operation Action
Check-In • Mailbox for the room is cleared of messages.
• The Mailbox language goes back to default.
• Mailbox for the room is cleared of greetings.
• Name for the room is deleted.
• Security code is deleted.
Check-Out No action
Edit No action
Conditions
• The SL1100 InMail language prompts installed on the CF must be version 2.10 or greater.
• This feature requires the SL1100 be licensed for Hotel/Motel (0007) and the InMail Advanced
Features (1015).
• Wake up call greetings require VRS programming and licensing.
• Wake up call greetings are only provided to single line phones. Multiline phones will hear dial tone
when answered.
• When a mailbox has a new message and the message is deleted upon check-in the MWI of the
mailbox will NOT be cancelled.
Related Features
Mailboxes
Hotel Motel Services
Programming
Program
Number
Program Name Description/Comments Assigned Data
40-07-01 Voice Prompt Lan-
guage Assignment for
VRS
This sets the default language for the system. This is
the language a mailbox will be set to when a room is
checked in.
Any valid language 1-23
Default = 1 (US English)
42-02-01 Hotel/Motel Telephone
Setup - Hotel Mode
Use this option to set a phone to operate in the Ho-
tel/Motel mode. Do not set the front desk phone for
Hotel/Motel mode.
0 =Normal Mode
1 = Hotel Mode
Default = 0
SL1100 ISSUE 3.5
2-124
Hotel Integration
H
To Next Page
Loading...
