Time and Date
Description
Since InMail is completely integrated with the telephone system software, the InMail time and date is
the same as the phone system time and date. Since time and date is used on telephone displays and
with the Auto Time Stamp and Time and Date Stamp features, be sure to set it accurately. To change
the time and date, use the system programmable options. See Programming below. The Time and
Date is retained if the telephone system power should fail or the system resets.
In addition, a Subscriber Mailbox user can hear the time and date when they call their mailbox.
Related Features
Auto Time Stamp on page 2-29
After a user listens to a message, InMail can optionally announce the time and date the message was
left.
Time and Date Stamp on page 2-235
An extension can listen to a message and dial TI to hear the time when the message was sent.
Programming
1. To set the system time and date from system programming:
Program
Number
Program Name Description
10-01-01 Time and Date Set the system Time and Date.
2. To set the system time from a system telephone:
• Press Speaker key.
• Dial 728.
• Dial two digits for the hour (24 hour clock, 13 = 1:00 PM).
• Dial two digits for the minutes (00-60).
• Press Speaker key to hang up.
Operation
Hearing the Current Time and Date
Log On to Subscriber Mailbox.
TI (84) Access the Time and Date option.
• InMail plays the time and date, and then returns you to the mailbox Main Menu.
0 Plays Help message.
SL1100 ISSUE 3.5
2-234
Time and Date
T
To Next Page
Loading...
