NEC SL1100 - Hang up

Hang Up
Description
Hang Up is an Automated Attendant option that immediately hangs up the outside call. When setting
up a Dial Action Table, you may want to use Hang Up for unused actions (rather than the caller
hearing the standard error message). You might also want to use the Hang Up action as the Timeout
destination for callers that wait too long to dial after the Automated Attendant answers.
Related Features
Automated Attendant on page 2-31
The Automated Attendant can automatically answer the telephone system's incoming calls, play an
Instruction Menu message, and provide dialing options to callers.
Dial Action Table on page 2-60
The Hang Up action is a Dial Action Table option.
Programming
1. Assign the Hang Up action to an available Dial Action Table key.
Program
Number
Program Name Description
47-13-01 InMail Dial Action Table Ac-
tions:
Hang Up Action (6) (HNGUP)
When the outside caller dials the key programmed with the Hang
Up action, the Automated Attendant immediately hangs up.
By default, the digit 9 is assigned as a Hang Up action.
Operation
Not applicable.
ISSUE 3.5 SL1100
InMail Feature Manual 2-123
H