NEC SL1100 - Auto Attendant Direct to Voice Mail

Auto Attendant Direct to Voice Mail
Description
When a subscriber enables Auto Attendant Direct to Voice Mail, Automated Attendant calls to their
extension go directly to their mailbox. Their phone does not ring for calls from the Automated
Attendant. You can optionally enable Auto Attendant Direct to Voice Mail from system programming. A
subscriber typically turns on Auto Attendant Direct to Voice Mail when they need to work at their desk
uninterrupted by outside callers sent from the Automated Attendant.
Keep in mind that Auto Attendant Direct to Voice Mail does not block Intercom calls from coworkers or
any other type of outside call not routed through the Automated Attendant. For example, with Auto
Attendant Direct to Voice Mail enabled, Direct Inwards Lines and transferred outside calls to an
extension work normally.
Related Features
Call Forward to a Mailbox on page 2-41
If a subscriber has calls forwarded immediately to his mailbox, Auto Attendant Direct to Voice Mail is
not necessary.
Greeting on page 2-110
A subscriber does not have to have a greeting recorded to activate Auto Attendant Direct to Voice
Mail.
Programming
1. Enable Auto Attendant Direct to Voice Mail From Your Subscriber Mailbox.
Refer to Operation on page 2-26.
2. Optionally enable Auto Attendant Direct to Voice Mail from System Programming.
Program
Number
Program Name Description
47-02-09 Auto Attendant Direct to Voice
Mail
(AUTO-ATT Direct VM)
Enter 1 (Yes) to enable Auto Attendant Direct to Voice Mail.
By default, this option is disabled (0).
Operation
Recording a Multiple Greeting and Setting Up Auto Attendant Direct to Voice Mail
Log on to Subscriber Mailbox.
SL1100 ISSUE 3.5
2-26
Auto Attendant Direct to Voice Mail
A