NEC SL1100 - Figure 3-5 Finish Installation Screen; Figure 3-6 Reboot PC Screen

8. Click Finish to complete the installation.
Figure 3-5 Finish Installation Screen
9. To finish the install, the PC
must be rebooted. This can be done now or later, but it must be done
before using the InMail Utility.
Figure 3-6 Reboot PC Screen
Starting the InMail Utility
1. Turn off the telephone system and access the InMail blade. (Refer to the Quick Setup on
page 1-1 that came with In-Mail for additional instructions, if required.)
SL1100 ISSUE 3.5
3-4
InMail Utility