NEC SL1100 - Table 2-12 Setting the Call Handling Options; Table 2-11 Recording Your Paging Message

Table 2-11 Recording Your Paging Message
Recording Your Paging Message In these Instructions:
[Telephone Softkey]
To record your Paging Message:
1. Log onto your Subscriber Mailbox.
2. [More> + More> +
Page]
Select Paging Message.
• Alternately dial PG (74).
3. Do one of the following:
a. [Lstn] Select to listen to the current Paging Message (if any).
• Alternately dial L (5).
# Exit the listen mode.
b. [Rec] Select to record the Paging Message.
• Alternately dial R (7).
[Pause] Select to pause recording.
• Alternately dial
*
.
[Resume] Select to resume recording (if paused).
• Alternately dial
*
.
[Cncl] Select to delete the recording.
• Alternately dial E (3).
[Done] Select to confirm the recording and exit the recording mode.
• Alternately dial # .
c. [Del] Select to delete the Paging Message.
• Alternately dial E (3).
d. [Back] Select to go back to the Mailbox Main Menu.
• Alternately dial #.
To set your call handling options refer to Table 2-12 Setting the Call Handling Options on page 2-203.
Table 2-12 Setting the Call Handling Options
Setting the Call Handling Options In these Instructions:
[Telephone Softkey]
To set your Call Handling options:
• This includes Automated Attendant Direct to Voice Mail as well as Park and Page.
1. Log onto your Subscriber Mailbox.
2. [More> + Setup] Select Mailbox Options. (You are at the Mailbox Options Menu).
• Alternately dial OP (67).
[CallH] Select Call Options. (You are at the Call Handling Options Menu).
• Alternately dial CO (26).
3. Do one of the following:
a. [DVM] Select to turn Automated Attendant Direct to Voice Mail on or off.
• Alternately dial O (6).
[Paging] Select to turn Park and Page on or off.
• Alternately dial E (3).
[Back] Select to go back to the Mailbox Options Menu.
To retrieve a call parked in a personal parked orbit refer to Table 2-13 Picking Up a Parked Call on
page 2-204.
ISSUE 3.5
SL1100
InMail Feature Manual 2-203
P