NEC SL1100 - Figure 3-17 Inmail Utility Initialize Confirmation Screen; Figure 3-18 Inmail Utility Initialization Progress Screen; Section 4 INSTALLING the INMAIL UTILITY

Initializing the InMail CompactFlash Card
The InMail Utility provides the option of initializing (reformatting) the InMail Compact Flash drive.
Initializing completely erases the card and loads the default prompt set for the chosen market. For
North America the prompt set is US English, Mexican Spanish and Canadian French. All recorded
names, messages and greetings are permanently erased during initialization.
Initialization of the InMail CF takes approximately 15 minutes using a USB 1.0 port.
1. To initialize (reformat) the InMail CompactFlash Card, click Initialize on the InMail Utility Main
Screen (Figure 3-8 InMail Utility Main Screen on page 3-6).
Figure 3-17 InMail Utility Initialize Confirmation Screen on page 3-12 is displayed.
Figure 3-17 InMail Utility Initialize Confirmation Screen
2. On the InMail Utility Initialize Screen, choose the market the InMail CF should be initialized for.
Then, click Initialize and the progress screen will appear. As each language prompt set is
installed, it will have a progress window.
Tips:
• Click Cancel on the Initialization progress window to stop the initialization.
• Click Cancel on any language install progress window to stop installation of that language
prompt set. The Utility will automatically move to the next prompt set.
3. Once the InMail CF has been initialized, click on Finish to exit the progress window.
Figure 3-18 InMail Utility Initialization Progress Screen
SECTION 4 INSTALLING THE INMAIL UTILITY
Attention:
The InMail Utility requires that a driver for the Reliance file system be installed before the utility is
installed. Currently, only Windows XP and Windows Vista and Windows 7 drivers are available.
SL1100
ISSUE 3.5
3-12
InMail Utility