NEC SL1100 - Page 107

5. Enter the email reply data (i.e., the email account to which replies should be sent).
Program
Number
Program Name Description
47-18-09 SMTP Reply-to Address Enter the email reply name.
• This is a required entry.
• Typically, this is the email account that handles inquiries and ad-
ministration for the installation site.
By default, there is no entry for this option.
Setting Up POP3 Login
1. Does the site's SMTP email server require POP3 Login?
• If yes:
Program
Number
Program Name Description
47-18-05 SMTP Authentication To enable POP3 Authentication, enter 2.
By default, this option is disabled (0)
47-19-01 POP3 Server Name Enter the name of the POP3 server that will handle email delivery for the
installation site. The POP3 server name is typically similar to pop.email-
server.com.
- If you didn't make an entry in the 90-11-11 and 90-11-12 DNS Server
options, this entry must be the IP address of the POP3 server since
there is no way to resolve a name.
By default, there is no entry for this option.
47-19-02 POP3 Port Number Specify the port (logical connection) the installation site's email server
uses for POP3. Normally, this is port 110.
By default, this option is 110.
47-19-03 POP3 Encryption Method Enable or disable POP3 SSL encryption for the site's email server.
The option you choose depends on the requirements of the POP3 email
server.
By default, this option is disabled (0).
47-19-04 POP3 User Name Enter the POP3 account's user name. If the subscriber's email address
is yourname@emailserver.com, the username would normally be your
name.
By default, there is no entry for this option.
47-19-05 POP3 Password Enter the password for the account specified in the previous option.
When authentication is enabled, this password is required to log onto the
email account.
By default, there is no entry for this option.
ISSUE 3.5 SL1100
InMail Feature Manual 2-89
E