4. Modify the Dial Action Tables to accommodate the new numbering.
Refer to TRF Action - Screened Transfer (1) (TRF).
Optionally modify the active Dial Action Table actions for the new extension numbers.
For example, to allow Automated Attendant callers to dial extension 5000, for digit 5:
• Change the Action to UTRF (2) or TRF (1).
• Change the Data to XXXX.
By default (in the above example), the digit 5 is undefined.
2-Digit Extension Numbering Example
InMail Does Not Support 2-Digit Extension Numbers 10-16
When setting up 2-digit extension numbering in a SL1100 with InMail, do not use extensions 10 ~ 32. Although you can set up
this application in 11-01-01 System Numbering and 11-02-01 Extension Numbering, Subscriber Mailboxes assigned in
47-02-02 Mailbox Number do not function. This is because mailboxes 1 ~ 32 are reserved for Routing Mailboxes and cannot
be reassigned.
The following example assigns a 2-digit extension number (26) to station port 6 and enables the
Subscriber Mailbox for extension 26. It also changes the
and # digits in the active Dial Action Table
to allow Quick Message and Remote Logon to the new 2-digit extension.
1. Enable 2-digit extension numbers 20 ~ 29.
Program
Number
Program Name Description
11-01-01 Extension Numbering In 11-01-01 Digit for the digit 2x, enter 2.
In 11-01-01 Type for the digit 2x, enter 2.
By default, the digit 1 is set up as a 3-digit extension number (100 ~
199).
2. Change the extension number for port 6 to 26.
Program
Number
Program Name Description
11-02-01 Extension Numbering For extension port 6, enter 26.
By default, extension port 6 is assigned to extension 106.
3. Change the mailbox number to match the new extension number.
Program
Number
Program Name Description
47-02-02 Mailbox Number For mailbox 6, assign mailbox number 26.
By default, mailbox 6 is assigned to mailbox number 106.
4. Modify the Dial Action Tables to accommodate the new numbering.
Make key 1 (digit 1) Action = UTRF (2) and Data = XX
Make key 11 (
) Action = REC1 (3) and Data = XX
Make key 12 (#) Action = LOGON (5) and Data = IXX
SL1100
ISSUE 3.5
2-104
Flexible Mailbox Numbering Plan
F
To Next Page
Loading...
