NEC SL1100 - Page 180

Recording a Mailbox Announcement Message
b. [Rec] Select to record the Mailbox Announcement Message.
• Alternately dial R (7).
[Cncl] Select to delete the recording.
• Alternately dial E (3).
[Done] Select to confirm the recording and exit the recording mode.
• Alternately dial #.
• If you don't set the Days in step c below, the message is automatically set
to active (i.e., indefinite).
c. [Days] Enter the number of days the Mailbox Announcement Message will be active (01 ~
99, 00 for inactive).
• Alternately dial A (2).
[OK] Select to confirm your entry.
• Alternately dial C (2).
[Clear] Select to back up to the previous level without making any
changes.
• Alternately dial I (4).
[Exit] Select to return to the Mailbox Announcement Message Menu
without making any changes.
• Alternately dial #.
[Reset] Select to make the Mailbox Announcement Message active indefinitely.
• Alternately dial
*
.
[OK] Select to confirm your entry.
• Alternately dial C (2).
[Clear] Select to back up to the previous level without making any
changes.
• Alternately dial I (4).
[Exit] Select to return to the Mailbox Announcement Message Menu
without making any changes.
• Alternately dial #.
[Del] Select to delete the Mailbox Announcement Message.
• Alternately dial D (3).
d. [Exit] Select to go back to the System Administrator Menu.
• Alternately dial #.
Listening to a Mailbox Announcement Message
To listen to a Mailbox Announcement Message:
1. Log onto Subscriber Mailbox.
2. Enter your Security Code (if enabled).
3. You hear the Mailbox Announcement Message.
[Skip] Optionally select to skip the Mailbox Announcement Message.
4. When the Mailbox Announcement Message completes, you go to the Mailbox Main Menu.
SL1100 ISSUE 3.5
2-162
Mailbox Announcement Message
M