NEC SL1100 - Page 215

Programming
Programming Subscriber Mailboxes
1. Assign the Next Call Routing Mailbox to a Subscriber Mailbox (if required).
Program
Number
Program Name Description
47-02-14 Next Call Routing Mailbox
(Next CR Mbox)
Specify the Routing Mailbox (1 ~ 32) that should provide the caller
leaving a message with additional dialing options.
By default, this option is 1 (Call Routing Mailbox 1). Call Routing
Mailbox numbers are 1 ~ 8.
2. Optionally allow the caller to dial additional digits (not just 0) once in the Next Call Routing
Mailbox.
Program
Number
Program Name Description
47-02-13 Dialing Option Enter 1 to enable additional dialing options.
By default, this option is disabled (0).
Programming Announcement Mailboxes
1. Assign the Next Call Routing Mailbox for the Announcement Mailbox (if required).
Program
Number
Program Name Description
47-09-01 Next Call Routing Mailbox
(Next CR Mbox)
Specify the Routing Mailbox (1 ~ 32) to which the caller should
route after hearing the Announcement Mailbox message.
By default, this option is 0 (Undefined).
2. Enter the number of times the Announcement Mailbox message should repeat before routing to
the Next Call Routing Mailbox.
Program
Number
Program Name Description
47-09-02 Repeat Count Specify the number of Announcement Mailbox message repeats (1
~ 10, or 0 for no repeats).
By default, this option is 0 (no repeats).
3. Be sure the Announcement Mailbox does not hang up after playing its message.
Program
Number
Program Name Description
47-09-03 Hang Up After
(HangUp)
Enter 0 (None) to disable this option.
By default, this option is disabled (0).
ISSUE 3.5 SL1100
InMail Feature Manual 2-197
N