NEC SL1100 - Page 226

Programming
1. Optionally set up a Quick Message with Greeting (REC1) Action.
Program
Number
Program Name Description
47-13-01 Dial Action Tables:
REC1 Action - Quick Message
With Greeting (3) (REC1)
To have the caller leave a Quick Message at a specific extension,
the corresponding Number option should be the extension number.
To have the caller leave a Quick Message at any caller-dialed ex-
tension, the corresponding Number option should be IXXX.
To have the caller leave a Quick Message at a caller-dialed exten-
sion in a specific range, the corresponding Number option should
be XXX.
• For example, to allow callers to leave a Quick Message exten-
sions 101 ~ 212 (V3.5 Changed), for key 3 enter REC1 for the
Action and XXX for the corresponding Number.
By default, key 3 Action is REC1 and Number is IXXX.
2. Optionally set up a Quick Message without Greeting (REC2) Action.
Program
Number
Program Name Description
47-13-01 Dial Action Tables:
REC2 Action - Quick Message
Without Greeting (4) (REC2)
To have the caller leave a Quick Message at a specific extension,
the corresponding Number option should be the extension number.
To have the caller leave a Quick Message at any caller-dialed ex-
tension, the corresponding Number option should be IXXX.
To have the caller leave a Quick Message at a caller-dialed exten-
sion in a specific range, the corresponding Number option should
be XXX.
• For example, to allow callers to leave a Quick Message exten-
sions 101 ~ 212 (V3.5 Changed), for key 3 enter REC2 for the
Action and XXX for the corresponding Number.
By default, key 3 Action is REC1 and Number is IXXX.
3. Set the maximum message length for callers leaving a Quick Message in a mailbox.
Program
Number
Program Name Description
47-01-04 Non-Subscriber Message
Length
(Mbox Msg Length)
Set the maximum length (1 ~ 4095 seconds) of recorded messages
for:
• Automated Attendant callers leaving a message or Quick Mes-
sage in a Subscriber Mailbox.
• Outside callers transferred by an extension user to a Subscriber
Mailbox.
By default, this option is 120 seconds.
SL1100 ISSUE 3.5
2-208
Quick Message
Q