NEC SL1100 - Page 257

Unscreened Transfer (UTRF) Operation
With Active
Greeting Recor-
ded
Sends call immediately to mailbox:
• Plays greeting.
• Prompts caller to start recording.
With Active
Greeting Not
Recorded
*1. After 24-02-04 Transfer Recall Time.
*2. Custom phone system programming may redirect the unanswered call (for example, to a hunt group or
another extension).
Related Features
Answer Table on page 2-19
Determines how the Automated Attendant answers outside calls on each trunk.
Automated Attendant on page 2-31
The Answer Table determines how the Automated Attendant answers calls.
Routing Mailbox on page 2-213
The mailbox associated with an Answer Table that specifies which dialing options (Dial Action Table)
and announcements are available to Automated Attendant callers.
Caller ID on page 2-43
InMail provides Caller ID data for an Unscreened Transfer as the call is ringing.
Dial Action Table on page 2-60
Defines the dialing options for the Call Routing Mailbox chosen by the active Answer Table.
You cannot program a Call Routing Mailbox as an Unscreened Transfer (UTRF) Dial Action Table
destination.
Forced Unscreened Transfer on page 2-106
The Subscriber Mailbox can optionally convert Automated Attendant Screened Transfers to
Unscreened Transfers.
Next Call Routing Mailbox on page 2-194
The Next Call Routing settings for a Subscriber Mailbox may provide additional options after the caller
leaves a message.
Screened Transfer on page 2-217
After an Automated Attendant caller dials an extension, InMail calls (screens) the destination
extension to see if the transfer can go through.
ISSUE 3.5
SL1100
InMail Feature Manual 2-239
U