NEC SL1100 - Page 27

Programming
Program
Number
Program Name Default
41-08-03 Delay Announcement Source Type
Set ACD Delay Announcement source to 2.
1 = VRS
2 = InMail
(default = 1)
41-19-01 Delay Message Start Timer
Determine how long the system waits before playing the Delay
Message.
0 ~ 64800 (seconds)
(default = 0)
41-19-02 Mailbox Number for 1st Announcement Message
Assign Voice Mail ACD Announcement Mailbox as the message
source for the 1st Announcement Message.
Dial (Up to 8 digits)
(default = No setting)
41-19-03 1st Delay Message Sending Count
Determine the 1st Delay Message Sending Count. This entry
must be set to 1 or higher for the message to play.
0 = No Message is Played, 1 ~ 255
(default = 0)
41-19-04 Mailbox Number for 2nd Announcement Message
Assign Voice Mail ACD Announcement Mailboxes as the mes-
sage source for the 2nd Announcement Message.
Dial (Up to 8 digits)
(default = No setting)
41-19-05 2nd Delay Message Sending Count
Determine the 2nd Delay Message Sending Count. This entry
must be set to 1 or higher for the message to play.
0 = No Message is Played, 1 ~ 255
(default = 0)
41-19-06 Wait Tone Type at Message Interval
Determine what the caller will hear between the messages.
0 = Ring Back Tone
1 = Music On Hold Tone
2 = Background Music Source
(default = 0)
41-19-07 ACD Forced Disconnect Time After 2nd Announcement
Assign how long the system should wait after the end of the
ACD delay message before disconnecting.
0 ~ 64800 (seconds)
(default = 0)
41-19-08 Delay Message Interval Time
Set the timer for the interval between the Delayed Messages.
0 ~ 64800 (seconds)
(default = 20)
47-07-02 Routing Mailbox Type
For Routing Mailboxes used in Program 41-19-02 or 41-19-04
set to Announcement.
Call Routing, Distribution, Announce-
ment, Directory, Undefined.
(default = Call Routing for mailboxes 1 ~
8, Announcement for mailboxes 9 ~ 32)
Operation
None
ISSUE 3.5 SL1100
InMail Feature Manual 2-9
A