NEC SL1100 - Page 35

2. Specify the Override Mailbox Category.
Program
Number
Program Name Description
47-11-02 Override Mailbox Category
(Override MB Ctg)
When you enable Answer Schedule Override for the selected An-
swer Table, you can choose to route Automated Attendant calls to
any of the following mailbox categories:
1 Station Mailbox
2 Group Mailbox
3 Routing Mailbox
0 Undefined
By default, this option is 0.
3. Specify the Override Mailbox Number.
Program
Number
Program Name Description
47-11-02 Override Mailbox Number
(Override MB Num)
For the selected Answer Table, choose the Override Mailbox num-
ber (maximum 3 digits, using 0 ~ 9). The mailbox number you select
must match the mailbox category specified in 47-11-02 above.
By default, there is No Entry for this option.
4. Optionally enable Answer Schedule Override from the System Administrator Mailbox.
Operation
Enabling Answer Schedule Override
Log On to System Administrator’s Mailbox.
SA
(72)
Access System Administrator options.
[Not applicable]
O (6) Access Answer Schedule Override.
[Not applicable]
1-8 Enter the number of the Answer Table you want to override.
You go to the Answer Schedule Override Menu.
O (6) Turn Answer Schedule Override on or off.
[On]
[Off]
C (2) Select the Override Mailbox.
[MBOX]
Enter the Override Mailbox number.
The Override Mailbox can be an Announcement, Call Routing, or Subscriber Mail-
box.
# Go back to the Answer Schedule Override Menu without
entering an Override Mailbox.
[Exit]
0 Plays Answer Schedule Override Menu Help message.
# Go back to the System Administrator Menu.
[Exit]
# Go back to the System Administrator Menu.
[Exit]
# Go back to the Main Menu.
[Exit]
ISSUE 3.5 SL1100
InMail Feature Manual 2-17
A