NEC SL1100 - Page 40

The Call Routing Mailbox provides the dialing instructions (Dial Action Table) and announcements to
Automated Attendant Callers.
Dial Action Table on page 2-60
The Dial Action Table defines the dialing options for the Call Routing Mailbox chosen by the Answer
Table, which in turn provides those options to Automated Attendant callers.
Programming
1. Assign Answer Tables to trunks.
Program
Number
Program Name Description
47-10-01 Answer Table Assignment
(Answer Table)
Assign an Answer Table (1 ~ 8) to each trunk that the Automated
Attendant should answer.
By default, all trunks are assigned to Answer Table 1.
2. Set up the Automated Attendant to answer trunk calls.
Program
Number
Program Name Description
22-02-01 Incoming Call Trunk Setup Assign Service Type 4 to each trunk you want to be a DIL. Make a
separate entry for each Night Service mode.
By default, trunks are Service Type 0 (Normal).
22-07-01 DIL Assignment For each trunk you designated above, enter the InMail pilot number.
Make a separate entry for each Night Service mode.
By default, there are no DIL destinations programmed.
3. Select the Answer Table to be customized.
Program
Number
Program Name Description
47-11 InMail Answer Table Options Select the Answer Table to be customized (1 ~ 8).
47-11-04 Next Answer Table If 10 Answer Schedules in an Answer Table are not sufficient, enter
the number of the Answer Table to which you want to link the selec-
ted table. InMail treats the two linked tables as a single 20 entry An-
swer Table.
By default, Answer Tables are not linked (Undefined).
47-11-03 Default Mailbox Category
(Default MB Ctg) and
Default Mailbox Number
(Default MB Num)
Set the mailbox the Answer Table uses if no Answer Schedule is in
effect.
By default, this option is 3 (Routing Mailbox) for Answer Table 1
and 0 (undefined) for all other Answer Tables.
SL1100 ISSUE 3.5
2-22
Answer Table
A