NEC SL1100 - Page 51

Fax Detection on page 2-96
The Automated Attendant can route outside calls to the company fax machine.
Multiple Company Greetings on page 2-192
One InMail system can provide individual greetings and dialing options for several companies.
Programming
1. Assign Answer Tables to trunks.
Program
Number
Program Name Description
47-10-01 Answer Table Assignment (An-
swer Table)
Assign an Answer Table (1 ~ 8) to each trunk that the Automated
Attendant should answer.
By default, all trunks are assigned to Answer Table 1.
2. Set up the Automated Attendant to answer trunk calls.
Program
Number
Program Name Description
22-02-01 Incoming Call Trunk Setup Assign Service Type 4 to each trunk you want to be a DIL. Make a
separate entry for each Night Service mode.
By default, all trunks are Service Type 0 (Normal).
22-07-01 DIL Assignment For each trunk you designated as a DIL above, enter the InMail pilot
number. Make a separate entry for each Night Service mode.
By default, no DIL destinations are programmed.
3. Set up the Answer Tables.
Turn to Answer Table on page 2-19 for more information.
By default, all trunks use Answer Table 1. Answer Schedule 1 is active and runs continuously.
4. Set up the Call Routing Mailboxes.
Turn to Routing Mailbox on page 2-213 for more information.
The active schedule (Answer Table 1, Answer Schedule 1) uses Call Routing Mailbox 000.
5. Set up the Dial Action Tables.
Turn to Dial Action Table on page 2-60 for more information.
By default, Call Routing Mailbox 000 uses Dial Action Table 1.
ISSUE 3.5 SL1100
InMail Feature Manual 2-33
A