NEC SL1100 - Page 62

2. Check your telephone system programming to be sure the telephone system is set up to receive
Caller ID and pass it to the InMail voice mail ports.
Program
Number
Program Name Description
14-01-22 Basic Trunk Data Setup - Call-
er ID to Voice Mail
Enter 1 (Yes) to enable this option.
By default, this option is disabled.
14-02-10 Analog Trunk Data Setup -
Caller ID
Enable (1) a trunk ability to receive Caller ID data.
By default, a trunk's ability to receive Caller ID data is disabled
(0).
20-09-02 Class of Service Options (In-
coming Call Service) - Caller
ID Display
Enter 1 (Yes) to enable the Caller ID display at an extension.
This option does not apply to InMail Voice Mail Ports.
By default, this option is disabled.
20-06-01 Class of Service for Exten-
sions
Assign Class of Service to extensions.
By default, Extension 101 is Class 15 and other extensions are
Class 1.
Operation
Not applicable.
SL1100 ISSUE 3.5
2-44
Caller ID
C