2. Customize the Dial Action Table options.
Program
Number
Program Name Description
47-13 InMail Dial Action Tables
The default Dial Action Table dialing options are:
Dial Action Table Default Settings
Key Dial Action Table 1 Dial Action Tables
2-16
1 UTRF to XXX
(Unscreened Transfer to user-dialed extension)
UND
(Undefined)
2 UTRF to XXX (V3.5 Changed)
(Unscreened Transfer to operator) (V3.5 Changed)
UND
(Undefined)
3 UTRF to XXX
(Unscreened Transfer to operator)
UND
(Undefined)
4 UND
(Undefined)
UND
(Undefined)
5 UND
(Undefined)
UND
(Undefined)
6 UND
(Undefined)
UND
(Undefined)
7 UND
(Undefined)
UND
(Undefined)
8 UND
(Undefined)
UND
(Undefined)
9 HNGUP
(Hangup)
UND
(Undefined)
0 UTRF to 101
(Unscreened Transfer to operator)
UND
(Undefined)
REC1 to IXXX
(Quick Message with Greeting to user-dialed extension)
UND
(Undefined)
# LOGON to IXXX
(Logon to user-dialed mailbox)
UND
(Undefined)
Timeout UTRF to 101
(Unscreened Transfer to operator)
UND
(Undefined)
3. Set the time limit for dialing commands for the Automated Attendant caller.
Program
Number
Program Name Description
47-08-03 Time Limit for Dialing Com-
mands
(Dialing Timeout)
Enter the Time Limit for Dialing Commands interval (0~5 seconds).
By default, the interval is 5 seconds.
If the caller waits too long to dial:
• When the associated Dial Action Table has a Timeout action pro-
grammed, the caller routes to that destination.
• When the associated Dial Action Table does not have a Timeout
action programmed, the Instruction Menu repeats three times and
then InMail hangs up.
ISSUE 3.5 SL1100
InMail Feature Manual 2-63
D
To Next Page
Loading...
