Chapter 7 Disk Array Configuration Setting
IV-33
Expansion Time: Specify the duration of time to expand the (Only Dynamic Pool) pool.
You can specify the duration of time to expand the physical disks added to the pool.
Although specifying 0 expands the pool in the shortest time, select an appropriate time
taking account of the load to the host I/O. The time specified in the field is just a target,
thus it is not assured to take the specified time.
5. Put a checkmark on the item you want to change, then specify the time.
6. When the time is successfully changed, the following message is displayed:
Figure 7-29 Message for Successful Completion of Changing Time
To Next Page
Loading...
