Nedap uPASS TARGET - F Document Revision

uPASS Target | installation guide
42/
42
F Document revision
Version Date Comment
1.15
2021-12-09
•
Fixed dip-switch description page 16
1.14
2021-01-20
• Added description to setup UHF frequency region / country of operation
1.13
2021-01-12
• New safety standard EN62368 (replaces EN60950)
1.12
2020-04-29
•
Product picture on cover page changed
1.11
2020-04-09
• Added antenna number in in message output format
• Updated corporate style
1.10
2020-01-27
• Fixed incorrect chapter references.
1.09
2019-02-26
• Added antenna coverage
1.08
2019-01-10
•
Update tag security and uhftool
• Added OSDP support
1.07
2016-12-07
• Changed dipswitch connector correctly oriented.
1.06
2016-06-01
•
Added UL specification for PoE
• Change UL specification power supply
1.05
2016-03-16
• Changed South-Korean frequency setting and number of channels.
• Changed Vietnam frequency setting and number of channels.
• Updated some country names in the frequency overview.
1.04
2016-03-01
•
Changed FCC reference: RSS210, CNR210 to RSS-247, CNR-247.
• FCC Part15.106 changed to FCC Part15.105
1.03
2016-02-18
• Added inch measurements to dimensions drawings
• Added image of the Ethernet connector
• Corrected text that mini USB and TNC aren’t supplied
• Added external antenna setting reference to tooling chapter.
• Used correct name for the TRANSIT compatible processor update tool
1.02
2016-01-20
• Added Russian frequencies
• Added FCC/IC numbers
• Added Antenna part numbers
• Added Antenna images (part numbers)
• Added mounting images (part numbers)
• Added information when to place the weather protection hood
• Removed the resistor that was placed instead of the 120KHz antenna in the
Nedap antenna interface.
1.01
2015-12-08
• Initial version