Nedap uPASS TARGET - Weather Protection Hood

uPASS Target | installation guide
12/
42
2.6 Weather protection hood
After the mounting of the uPASS Target an optional weather protection hood can be placed. The weather protection
hood protects the uPASS Target from excess heat caused by sun irradiation. It is advised to install the weather
protection hood if the ambient temperatures are 40°C (104°F) or higher and more than 2 hours of direct sunlight on the
uPASS Target housing.
The weather hood can be placed over an already mounted uPASS Target (some bolts need to be loosened). It is
recommended that the connections to uPASS Target are made before mounting the weather protection hood. If the
weather protection hood is mounted the connectors are hard to reach.
The weather protection hood has to be ordered separately (see appendix E).
Figure 5: Weather protection hood