uPASS Target | installation guide
36/
7 Firmware update
The firmware of the uPASS Target (UHF processor) can be updated using UHFTOOL. The latest version can be
downloaded from the partner portal; https://portal.nedapidentification.com/.
Click Options, Update firmware.
Select the firmware file. You may choose the available STANDARD or OSDP firmware version or alternatively an
external provided firmware file.
Figure 36: Firmware update
Click Download to start the update process. During the update the progress bar indicates the progress. If the progress
bar reaches 100% the firmware update is done and the reader will start the new firmware.
Note: for updating firmware in the TRANSIT compatible processor use TRANSIT software (PICLOAD).
To Next Page
Loading...
