uPASS Target | installation guide
6/
1.2 Supported tags
Any EPC Class 1 Gen 2 tag is supported by the uPASS Target and will output on the RS422, RS485 or Ethernet
interfaces. Also special formatted Nedap UHF tags are supported for output on special interfaces. The following
formats are supported:
NEDAP UHF Wiegand tags
These tags will contain all Wiegand information including facility code and parity bits. All Wiegand formats can be
supported. The reader transparently sends this information via the Wiegand outputs. There is no need to change any
DIP-switches or configuration settings. See chapter 3.2.2 for wiring details.
NEDAP UHF Magstripe tags
These tags will contain all magstripe information. The reader transparently sends this information onto the magstripe
interface. There is no need to change any DIP-switches or configuration settings. See chapter 3.2.2 for wiring details.
NEDAP UHF XS tags
These tags are especially programmed in the same format as our 2.45GHz AVI tags (Compact-Tag, Window-Button and
Heavy-Duty-Tag). The tags will have a customer-code and id-number.
The NEDAP-XS formatted tags are commonly used in TRANSIT compatible mode. See also chapter 4.
To Next Page
Loading...
