uPASS Target | installation guide
37/
A Technical specifications
11.26in x 11.22in x 3.01in
temperature
-22 °F … +140 °F
10 .. 93 % non-condensing
Up to 10 meters (33 feet) (line-of-sight)
With passive Nedap UHF tags
12 … 24VDC ±10% power supply
Power over Ethernet plus (IEEE 802.3at)
consumption
0.75A @ 24VDC
2 digital input for LED control
1 digital input for reader disable1 TNC Nedap
UHF antenna
Active low inputs (0V – 5V)
Active low input (0V – 5V)
Wiegand, Magstripe (clock & data), Nedap
EM4102, Nedap CR/LF
Other possible in TRANSIT compatible mode, see
TRANSIT firmware guides
1 relay (NO, common, NC) 24VDC 2A
RS-422, RS-485, Ethernet and USB
frequency