NetApp HCI User Manual

curl -X GET "https://<managementNodeIP>/mnode/about" -H "accept:
application/json"
• Get version information about individual services running on the management node:
curl -X GET "https://<managementNodeIP>/mnode/services?status=running"
-H "accept: */*" -H "Authorization: Bearer <ID>"

You can find the bearer ID used by the API by running a GET command and retrieving it
from the curl response.
REST API UI steps
1. Access the REST API UI for the service by entering the management node IP address followed by
/mnode/:
https://<managementNodeIP>/mnode/
2. Do one of the following:
◦ Get version information about the management node OS, the management services bundle, and the
management node API (mnode-api) service that are running on the management node:
a. Select GET /about.
b. Select Try it out.
c. Select Execute.
The management services bundle version ("mnode_bundle_version"), management node OS
version ("os_version"), and management node API version ("version") are indicated in the
response body.
◦ Get version information about individual services running on the management node:
a. Select GET /services.
b. Select Try it out.
c. Select the status as Running.
d. Select Execute.
The services that are running on the management node are indicated in the response body.
Find more information
• NetApp Element Plug-in for vCenter Server
• NetApp HCI Resources Page

NetApp HCI Specifications

General

Product Type	Hyperconverged Infrastructure (HCI)
Data Services	Data protection, encryption
Connectivity	10 GbE, 25 GbE, 40 GbE, 100 GbE
Hypervisor Support	VMware vSphere
Management Node	Included in the solution
Storage Media	SSD and HDD
Node Types	Compute nodes, storage nodes
Storage Protocols	iSCSI
Data Reduction	Deduplication, compression, thin provisioning
High Availability	Built-in redundancy