c. Click Authorize to begin a session.
d. Close the window.
3. Click PUT /settings.
4. Click Try it out.
5.
To enable a proxy server, you must set use_proxy to true. Enter the IP or host name and proxy port
destinations.
The proxy user name, proxy password, and SSH port are optional and should be omitted if not used.
{
"proxy_ip_or_hostname": "[IP or name]",
"use_proxy": [true/false],
"proxy_username": "[username]",
"proxy_password": "[password]",
"proxy_port": [port value],
"proxy_ssh_port": [port value: default is 443]
}
6. Click Execute.
Find more information
• NetApp Element Plug-in for vCenter Server
• NetApp HCI Resources Page
Verify management node OS and services versions
You can verify the version numbers of the management node OS, management services
bundle, and individual services running on the management node using the REST API in
the management node.
What you’ll need
• Your cluster is running NetApp Element software 11.3 or later.
• You have deployed a management node running version 11.3 or later.
Options
• API commands
• REST API UI steps
API commands
• Get version information about the management node OS, the management services bundle, and the
management node API (mnode-api) service that are running on the management node:
To Next Page
Loading...
Need help?
General
