NetApp HCI User Manual

2. Locate the installation asset ID:
a. Open the management node REST API UI on the management node:
https://[management node IP]/inventory/1/
b. Click Authorize and complete the following:
i. Enter the cluster user name and password.
ii.
Enter the client ID as mnode-client.
iii. Click Authorize to begin a session.
iv. Close the authorization window.
c. From the REST API UI, click GET /installations.
d. Click Try it out.
e. Click Execute.
f.
From the response, copy the installation asset ID (id).
"id": "abcd01e2-xx00-4ccf-11ee-11f111xx9a0b",
"management": {
Ê "errors": [],
Ê "inventory": {
Ê "authoritativeClusterMvip": "10.111.111.111",
Ê "bundleVersion": "2.14.19",
Ê "managementIp": "10.111.111.111",
Ê "version": "1.4.12"
g. From the REST API UI, click GET /installations/{id}.
h. Click Try it out.
i. Paste the installation asset ID into the id field.
j. Click Execute.
k.
From the response, copy and save the storage cluster ID ("id") of the cluster you intend to upgrade
for use in a later step.
"storage": {
Ê "errors": [],
Ê "inventory": {
Ê "clusters": [
Ê {
Ê "clusterUuid": "a1bd1111-4f1e-46zz-ab6f-0a1111b1111x",
Ê "id": "a1bd1111-4f1e-46zz-ab6f-a1a1a111b012",
3. Run the storage firmware upgrade:

NetApp HCI Specifications

General

Product Type	Hyperconverged Infrastructure (HCI)
Data Services	Data protection, encryption
Connectivity	10 GbE, 25 GbE, 40 GbE, 100 GbE
Hypervisor Support	VMware vSphere
Management Node	Included in the solution
Storage Media	SSD and HDD
Node Types	Compute nodes, storage nodes
Storage Protocols	iSCSI
Data Reduction	Deduplication, compression, thin provisioning
High Availability	Built-in redundancy