NetApp HCI User Manual

Ê "percent": 0,
Ê "step": "ClusterPreStart",
Ê "timestamp": "2020-04-21T22:10:57.057Z",
Ê "failedHealthChecks": [
Ê {
Ê "checkID": 0,
Ê "name": "string",
Ê "displayName": "string",
Ê "passed": true,
Ê "kb": "string",
Ê "description": "string",
Ê "remedy": "string",
Ê "severity": "string",
Ê "data": {},
Ê "nodeID": 0
Ê }
Ê ]
Ê },
Ê "taskId": "123f14a4-1a1a-11e9-7777-6c0b84e123b2",
Ê "dateCompleted": "2020-04-21T22:10:57.057Z",
Ê "dateCreated": "2020-04-21T22:10:57.057Z"
}
h.
Copy the upgrade ID ("upgradeId") that is part of the response.
4. Verify the upgrade progress and results:
a. Click GET /upgrades/{upgradeId}.
b. Click Try it out.
c. Enter the upgrade ID from the previous step in upgradeId.
d. Click Execute.
e. Do one of the following if there are problems or special requirements during the upgrade:

NetApp HCI Specifications

General

Product Type	Hyperconverged Infrastructure (HCI)
Data Services	Data protection, encryption
Connectivity	10 GbE, 25 GbE, 40 GbE, 100 GbE
Hypervisor Support	VMware vSphere
Management Node	Included in the solution
Storage Media	SSD and HDD
Node Types	Compute nodes, storage nodes
Storage Protocols	iSCSI
Data Reduction	Deduplication, compression, thin provisioning
High Availability	Built-in redundancy