NetApp HCI - Page 90

chkconfig smartd off
4. Repeat these steps on the rest of the compute nodes in your installation.
Find more information
• Turn off the smartd service in VMware ESXi
• VMware KB article 2133286
Keep VMware vSphere up to date
After deploying NetApp HCI, you should use VMware vSphere Lifecycle Manager to
apply the latest security patches for the version of VMware vSphere used with NetApp
HCI.
Use the Interoperability Matrix Tool to ensure that all versions of software are compatible. See the VMware
vSphere Lifecycle Manager documentation for more information.
Find more information
• NetApp Element Plug-in for vCenter Server
• NetApp HCI Resources page
• SolidFire and Element Software Documentation Center
Install GPU drivers for GPU-enabled compute nodes
Compute nodes with NVIDIA graphics processing units (GPUs), like the H610C, need
NVIDIA software drivers installed in VMware ESXi so that they can take advantage of the
increased processing power. After deploying compute nodes with GPUs, you need to
perform these steps on each GPU-enabled compute node to install the GPU drivers in
ESXi.
Steps
1. Open a browser and browse to the NVIDIA licensing portal at the following URL:
https://nvid.nvidia.com/dashboard/
2. Download one of the following driver packages to your computer, depending on your environment:
vSphere version Driver package
vSphere 6.5
NVIDIA-GRID-vSphere-6.5-410.92-410.91-
412.16.zip
vSphere 6.7
NVIDIA-GRID-vSphere-6.7-410.92-410.91-
412.16.zip