NETGEAR genie Advanced Home
40
N300 Wireless ADSL2+ Modem Router DGN2200v3
3. Select Yes and click Next.
The Setup Wizard searches your Internet connection for servers and protocols to
determine your ISP configuration. The following screen displays:
WPS Wizard
The WPS Wizard helps you add a WPS-capable client device (a wireless device or computer)
to your network. On the client device, either press its WPS button or locate its WPS PIN.
To use the WPS Wizard:
1. Select Advanced > WPS W
izard.
2. Click Next.
The following screen lets you select the method for adding the WPS client (a
wireless device or computer).
You can use either the push button or PIN method.
3. Select either Push Button or PIN Number.
• T
o use the push button method, either click the WPS button on this screen, or press
the WPS button on the side of the modem router. Within 2 minutes, go to the wireless
client and press its WPS button to join the network without entering a password.
To Next Page
Loading...
Need help?
General
